Powerful performance with expert handling for trimming large hedges
The Bosch AHS 70-34 electric hedgecutter is at 3.9 kg up to 15% lighter than previous models. Thanks to its improved weight distribution the device is easy to handle. A see-through hand guard, softgrip rear handle and multi-position front handle ensure a more comfortable cutting experience. The AHS 70-34 has an AGR-certification for back-friendly products. The hedgecutter offers maximum performance with its 700 W motor, a laser-cut, diamond-ground blade with sawing function and 34 mm tooth opening.
|
Advanced tools |
When you seek the best. |
Motor power | 700 W |
Blade length | 700 mm |
Tooth opening | 34 mm |
No-load stroke rate | 3.400 spm |
Weight | 3,9 kg |
Part number: | 0600847K70 |
EAN code: | 3165140643672 |
Up to 15% lighter than previous models, the Bosch AHS 70-34 electric hedgecutter has been redesigned with improved weight distribution for better handling. The hedgecutter features a transparent hand guard, soft grip handles and several switch positions to ensure safe and more comfortable cutting. Thanks to its 700 W motor, new blade design with sawing function and 34 mm tooth opening, this hedgecutter offers maximum performance. Sawing teeth at the front of the blade saw through branches up to 38 mm in diameter. What’s more, its extremely high-torque (50 Nm) slipping clutch makes for an impressive trimming experience.
Stubborn and thick branches are no match for the Bosch AHS 70-34, thanks to the high-performance 700 W motor and 34 mm tooth opening for woody, older branches and overgrowth. Powerful enough to tackle even large sized hedges with ease, the low weight hedgecutter with long reach makes it possible to trim even hard-to-reach spots. The electric hedgecutter is ideal for cutting back hedges as well as reshaping large bushes. Its sawing teeth at the tip of the blade allow the user to saw through branches up to 38 mm in diameter.
Benefit from easy and safe handling: weighing 3.9 kg, this long reaching hedgecutter is up to 15% lighter than predecessor models and makes it possible to cut large hedges without much effort or tiring out the users’ arms. The softgrip on the rear handle and the multi-position front handle provide optimum balance and ergonomics as well as a comfortable working position. The hedgetrimmer also has an AGR-certification for back-friendly products. A see-through hand guard and blade tip protectors make each cut a safer one, especially when cutting with limited visibility as when trimming along walls and paths.
Trimming large-sized hedges is no problem for the Bosch AHS 70-34. Its 70 cm long laser cut, diamond-ground blade provides a clean and precise cut every time. Easily cut through branches with the 34 mm tooth opening that makes it ideal for woody, older branches. The sawing teeth at the tip of the blade enable branches up to 38 mm in diameter to be sawed through. The 3.9 kg hedgecutter also features an extremely high-torque (50 Nm) slipping clutch for an impressive cutting performance. A protective blade cover is also included to ensure safe storage.
Motor power | 700 W |
Blade length | 700 mm |
Tooth opening | 34 mm |
Slipping clutch torque | 50 Nm |
No-load stroke rate | 3.400 spm |
Weight | 3,9 kg |
Measured values determined according to EN 60745
Total vibration values (vector sum of three directions).
Vibration emission value ah | 4.0 m/s² |
Uncertainty K | 1.5 m/s² |
The A-rated noise level of the power tool is typically as follows: Sound pressure level 76 dB(A); Sound power level 97 dB(A). Uncertainty K= 1 dB.
You will find more user manuals in the service section:
User manuals
We want your opinion!
What do you think of this product? You can submit your brief assessment here.
Hedgecutters
|